Displays and mounting plates can be inserted for different purposes. Mostly they are used to seperate/ safe the products laid into the case-base, from the case-lid.
At the same time, there can be additional functions to the displays, as that can be the support of documents and small products.

The main meaning for a display, mounted into a lid, is, to safe the protucts, not to fall out the lid. At the same time this display can keep the protucts, which are inserted into the base, at their specified place.
Speciality: safety for your products.

Beside the description of safety, you can produce on one or the other side of the displays, some subjects for holding your incoming products.
Speciality: safety and holding your products.

Systemboards can be  fixed to the lid with special mounting parts. They can be implemented on one or both sides with loops to keep the products, or bags for inserting the products. That can be tools or working materials.
The system displays can easily be changed. So this case can be used even for other occasions.
Speciality: flexible and compatible.

The optimum of safty and the ideal start of presentation for the products is, to be clearly positioned into the case, preferably unterneath a transparent display, integrated into the case.

Certainly a businesscase needs to have the space for documents, prospects, pens, handy and other things, preferable in the lid.
This documentwallet can specially be produced, as desired, even if just small quantities are needed.
Depending on the requirement and the application area of the cases, the foaminlet and ist material will be decided.

Even with metrological, electric or electronical needs in cases, the mountingpanel is very necessary for the equipment and for including the control elements. These are specially conceived and mounted into the cases.
To tighten the frontpanels there are systemprofiles with srew nuts to push and cornerprofiles with riveted srew nuts.

We handle the electrical cabling and mounting in our cases professional, using the plans and parts list. The electrical cabling is proofed after VDE 0100 and will be finished as a complete part.
Equipment and functional groups can be integrated into the cases, if desired with a printing onto the frontpanel.