Pro Works flight capable
High quality tool case, flight capable, thoroughly tried and for universal use.
From Euro 180
|
Pro Works FLIGHT Star Basic
- Depending on the version and equipment an addition
- Document board is built-in in the lid and/or a
- Second tool board is built-in
- Tool board no. 3 can be equipped on both sides
- The board can be removed and exchanged by means of swivel locks
- The tool tray is covered with a tool board on one side
- so that small parts are secured from falling out
- A tool tray with variable partition walls is available in the base case
- Counter-sunk embedded locks and handles consist in every transport
- The tools and products in your case can be safed with a padlock ( not inclueded into the delivery )
Supplied in the delivery:
| FLIGHT Star BASIC S | FLIGHT Star BASIC A | FLIGHT Star BASIC B | ||
| 1 tool tray | 1 tool tray | 1 tool tray | ||
| 1 tool board no. 1 | 1 tool board no. 1 | 1 tool board no. 3 | ||
| 1 tool board no. 3 | 1 tool board no. 3 | |||
| 1 document board |
| Model | Inside dimensions B/T/H (mm) |
Article No. |
|---|---|---|
| FLIGHT Star BASIC S | 460 x 320 x 205 | 102480.00 |
| FLIGHT Star BASIC A | 460 x 320 x 205 | 102480.01 |
| FLIGHT Star BASIC B | 460 x 320 x 205 | 102480.02 |
Pro Works FLIGHT Star Alpha
- There is a toolboard fixed into the lid,
- and if nessessary you have the possibility to fix a document-panel, too
- The board can be removed and exchanged by means of swivel locks.
- A tool tray with variable partition walls is available in the middle of the case
- the tool tray is covered with a tool board
- The case base is padded with foam. Here you can put measuring instruments, laptop computers, control boards and many more.
Supplied in the delivery:
| FLIGHT Star ALPHA S | FLIGHT Star ALPHA | |
| 1 tool tray | 1 tool tray | |
| 1 tool board no. 3 | 1 tool board no. 3 | |
| 1 document board |
Pro Works FLIGHT Star Alpha Sorti
The cases ALPHA Start Sorti und ALPHA Sorti have additional storage boxes in the bottom part.
Storage boxes are closed with foam. Otherwise both cases are identical with ALPHA Star and ALPHA. In this version tool case and small part boxes have been used in one unit.
Supplied in the delivery:
| FLIGHT Star Sorti S | FLIGHT Star Sorti | |
| 1 tool tray | 1 tool tray | |
| 1 too board no. 3 | 1 too board no. 3 | |
| 2 storage boxes size 1 | 2 storage boxes size 1 | |
| 6 storage boxes size 2 | 6 storage boxes size 2 | |
| 3 storage boxes size 3 | 3 storage boxes size 3 | |
| 2 storage boxes size 4 | 2 storage boxes size 4 | |
| 1 document board |
| Model | Inside dimensions B/T/H (mm) |
Article No. |
|---|---|---|
| FLIGHT Star ALPHA S | 460 x 327 x 150+95 | 102480.03 |
| FLIGHT Star ALPHA | 460 x 327 x 150+95 | 102480.13 |
| FLIGHT Star Sorti S | 460 x 327 x 150+78 | 102480.04 |
| FLIGHT Star Sorti | 460 x 327 x 150+78 | 102480.14 |
| storage boxe size 1 | 54 x 54 x 63 | 640014 |
| storage boxe size 2 | 108 x 54 x 63 | 640015 |
| storage boxe size 3 | 108 x 108 x 63 | 640016 |
| storage boxe size 4 | 162 x 108 x 63 | 640017 |
Pro Works FLIGHT Star Duo S
The Star of the tool cases with many advantages. The DUO Star features a totally new concept.
- If the locks are unlocked, both case halves are set-up V-shaped. All the tool board are accessible immediately.
- All the tool board are accessible immediately.
- There are 4 double sided tool boards inside.
- two of them each case side
- The case is put down upright just in the same way as it is carried.
- The case is opened in the same upright position.
- There is no need to place it on the floor and to bend down to take a tool.
- both case halves are set-up V-shaped
- the case is applicable for the SHOPPER-System
- maximum opening is 95 degrees
Supplied in the delivery:
FLIGHT STAR DUO S
2 too board no. 1
1 too board no. 2
1 too board no. 3
| Model | Inside dimensions B/T/H (mm) |
Article No. |
|---|---|---|
| FLIGHT Star DUO S with rolls | 484 x 218 x 410 | 102500.00 |
| FLIGHT Star DUO S without rolls | 484 x 218 x 410 | 102500.01 |